Dewalt ToughSystem Radio BACK IN STOCK - Shop Now

Makita DLX2176TJ 18V Combi Drill & Impact Driver Twin Pack (2 x 5.0Ah Batteries)

SKU: MAK-DLX2176TJ

Log in for pricing

A drill and impact driver set ideal for both trade professionals and DIY hobbyists alike

The DLX2176TJ is made up of Makita's DHP481 Combi Drill and DTD154 Impact Driver. Also included in the kit are 2 x 5.0Ah batteries, a charger and a MakPac Type 3 Connector Case. Both tools feature a fully brushless motor for the highest power output. The DHP481 will drill up to 16mm in masonry. The DTD154 features tightening mode for self-drilling screws.

DHP481 Features:

  • Single sleeve keyless chuck allows for easy bit installation/removal by one hand
  • Brushless motor
  • Electric brake
  • Twin LED job light with afterglow
  • 2 mechanical gears
  • Forward/reverse rotation
  • Battery fuel gauge
  • Variable speed control by trigger
  • Best possible ergonomic handle for drill-driver applications
  • Compact overall length

DTD154 Features:

  • T-mode: Tightening mode for self-drilling screw
  • Electronic 3-stage impact power selection (Hard/Medium/Soft)
  • Brushless motor
  • One touch sliding chuck for easy bit installation and removal
  • LED job light
  • Ergonomic soft grip
  • Electric brake
  • Variable speed control by trigger
  • Forward/reverse rotation
  • Compact overall length

Comes with:

  • 2 x 5.0Ah Li-ion Batteries
  • Battery Charger
  • MakPac Type 3 Connector Case
  • Side handle/depth stop for combi drill

DHP481 Specification:

  • Chuck Capacity: 1.5 - 13mm
  • Blows per Minute (Hi) - ipm: 0 - 31,500 ipm
  • Blows per Minute (Lo) - ipm: 0 - 8,250 ipm
  • No Load Speed (Hi): 0 - 2100 rpm
  • No Load Speed (Lo): 0 - 550 rpm
  • Max. in wood: 76 mm
  • Max. in masonry: 16 mm
  • Max. in steel: 13 mm
  • Torque Settings: 21 + drill
  • Vibration K factor: 1.5 m/sec_
  • Maximum Output: 640 w
  • Max. Fastening Torque (Soft Joint): 60 Nm
  • Max. Fastening Torque (Hard Joint): 115 Nm
  • Vibration: Impact drilling into concrete: 6.5 m/sec_
  • Vibration: Drilling into metal: 2.5 m/sec_
  • Weight (with batteries): 2.7 kg

DTD154 Specification:

  • Standard Bolt: M5-M16
  • High Tensile Bolt: M5-M14
  • Coarse thread (length): 22 - 125 mm
  • Max Fastening Torque: 175 Nm
  • Vibration: Fastening Bolt: 12.5 m/sec_
  • Vibration K factor: 1.5 m/sec_
  • Noise sound pressure: 96 dB(A)
  • Noise sound power: 107 dB(A)
  • Noise K factor: 3 dB(A)
  • Net weight: 1.5 kg
  • Impact Selection: 3 stage + Tek mode
  • Driving Shank: 6.35mm (1/4") Hex
  • Blows per Minute (Hi) - ipm: 0 - 3800 ipm
  • Blows per Minute (Med) - ipm: 0 - 2600 ipm
  • Blows per Minute (Lo) - ipm: 0 - 1100 ipm
  • Machine Screw: M4-M8
  • No Load Speed (hard/med/soft): 0-3600 / 2100 / 1100 rpm