Bond It Mitre Kit - Gap-Filling Adhesive & Accelerator (Box of 12)

Description

Bond It Mitre Kit is a high-performance, high-viscosity ethyl cyanoacrylate adhesive combined with an accelerator spray, designed to provide rapid bonding and excellent gap-filling properties. This twin pack ensures a fast, clean, and reliable bond - perfect for fine joints such as mitres where precision and appearance matter. It is ideal for use on porous and uneven surfaces such as MDF and oak, making it a favourite among joiners, carpenters, and fitters.

Features & Benefits

• Rapid bonding – parts can be handled almost immediately
• Non-drip formula – ideal for vertical applications
• Gap-filling performance for uneven or porous surfaces
• Works effectively on difficult substrates such as MDF and oak
• Speeds up strength development for immediate usability

Suitable For

• MDF, chipboard, and all common timbers (oak, pine, etc.)
• PVCu and most plastics
• Rubber and leather
• General joinery and woodworking applications
• Decorative mitres and precise bonding work

Limitations

• Not suitable for permanent glass bonding
• Do not use on oily or greasy surfaces
• May cause staining on uPVC if accelerator is over-applied - always test on a small area first
• Avoid strong light and high heat exposure

Application Instructions

• Preparation: Ensure both surfaces are clean, dry, and free from dust, oil, or contaminants
• Accelerator: Spray lightly over one surface and allow to dry. Use on the least visible face of the joint where possible
• Adhesive: Apply adhesive to the opposite surface and immediately bring the two parts together
• Bonding: Apply light, even pressure until the bond forms (typically within 10 seconds)
• Clean-up: Wipe away any uncured adhesive using a dry cloth. Once cured, remove mechanically

Technical Data

• Adhesive Type: Ethyl Cyanoacrylate
• Activator Type: Aerosol Accelerator
• Colour: Clear
• Viscosity (Adhesive): 1400–1700 mPa·s
• Gap Filling: Up to 0.25 mm
• Tensile Strength (ASTM D2095): 20 MPa
• Tensile Shear Strength (ASTM D1002): 14 MPa
• Service Temperature Range: -60°C to +80°C
• Grab: Very high initial grab
• Drying Time: 10 seconds
• Flash Point: > +81°C (Adhesive), < -40°C (Activator)
• Flammability: Aerosol extremely flammable
• Density: 1.06 g/cm³
• Commodity Code: 3506990000
  

Storage & Shelf Life

• Shelf Life: Minimum 12 months from date of manufacture
• Storage Conditions: Store upright in a cool, dry place between +5°C and +25°C
• Protect from frost, heat, and direct sunlight